Systems for industrial application
ecofil i 5x16 mm²
Thanks to this system, installing industrial appliances can quickly be performed saving both work and time. Compared to a conventional, rigid current rail it has all the advantages of a flexible flat cable. The connecting boxes show a protection degree of IP 65 which suit industrial applications. They are fitted with compact terminal blocks which are easy to manipulate. If necessary safety cutouts can be connected to the boxes either directly at the output or separately by means of a cable.
Systems for industrial application
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
Systems for building installation
ecobus combi 5x2,5 mm² + 2x1,5 mm²
In buildings, this system acts as an "Energy Bus" and is ideal to perform a ring circuit for example to supply an entire building floor. The system can thus be compared to a flexible conductor rail. Outlets are intended for conductors of 4 mm² section. In order to fully enjoy the flexibility of such an installation, we also recommend to use the ecobus power system together with decentral organized safety cutouts.
Systems for building installation
ecobus power 5x2,5 mm²
Combined with the ecobus power 5x10 system mentioned above or used as a system of its own - ecobus power 5x2.5 proved to be ideal for performing a flexible connection of end receivers. Even if bus control is not foreseen in every building, the implementation should take a future bus installation into account. Thanks to ecobus power 5x2.5 this can easily be achieved.
Systems for building installation
ecobus data 2x1.5 mm²
This cable is a signal line, which can be laid in the building without being interrupted anywhere. It has interesting properties in the field of data transmission and has specially been conceived for bus systems in building automation such as KNX/EIB and similar systems. The twisted pair is replaced by a twin shielding which fully protects the conductors and ensures the secure working of the bus installation. ecobus data is intended for the connection of sensors. For actuators it is recommended to use the ecobus combi cable which can simultaneously supply the devices with current.
Systems for building installation
multibus 4x1,5 mm²
The ideal complement of ecobus combi. Multibus has been conceived for wiring bus systems or other control devices which need three or four untwisted leads. The basic version of the cable meets the requirements of protection degree IP 42. Higher protection degrees are available on request. The multibus system allows a simultaneous connection of the different leads. Thanks to a special swiveling mechanism fitted with pointed contacts, contact can quickly be established both whenn connecting the outlets and when mounting the connecting box on the cable.
Systems for building installation
ecoline-p3 3x2,5 mm²
The new quick connection technique: the contact is established simultaneously with the 3 leads without any tool. This cabling technique is based on a completely new connection principle which is the result of our 30 years' experience in this field. When folding back the integrated lever the flat cable is connected by means of sheath piercing cutting teeth. Ecoline-p3 is specially designed for lamp connection or socket cabling.
Systems for building installation
ecobus power 5x10 mm²
In buildings, this system acts as an "Energy Bus" and is ideal to perform a ring circuit for example to supply an entire building floor. The system can thus be compared to a flexible conductor rail. Outlets are intended for conductors of 4 mm² section. In order to fully enjoy the flexibility of such an installation, we also recommend to use the ecobus power system together with decentral organized safety cutouts.
In a further step, to connect the end-receivers while keeping the advantages of the flat cable installation up to the devices, both systems ecobus combi and ecobus power 5x2.5 with 2.5 mm² section can be used (see below).